{"title":"11 11\/32'' (288.1 mm)","description":"\u003ch2\u003e11 11\/32 inch (288.1 mm) drill-center pulls for wide drawer and appliance panels\u003c\/h2\u003e\u003cp\u003e11 11\/32 inch (288.1 mm) drill-center pulls cover the imperial conversion of a metric spacing close to 288 mm. The size sits just below the 12 inch appliance-pull threshold and shows up on wide drawer fronts, small appliance panels, and certain European-built cabinet runs. The spec is essentially a precise metric measurement converted into an awkward imperial fraction. That's why the listing appears at this exact dimension.\u003c\/p\u003e\u003ch3\u003eWhere this size fits\u003c\/h3\u003e\u003cp\u003eWide pot drawers in custom kitchens. Panel-ready under-counter appliances from European brands. Tall pantry and broom-closet doors that align with this exact spec. Some bath vanity drawer fronts in oversized primary baths. The size is non-standard enough that most installations using it are spec'd from a specific manufacturer's catalog. Custom designer kitchens with metric construction throughout occasionally land on this listing for a specific drawer face dimension.\u003c\/p\u003e\u003ch3\u003eWhat hardware looks like here\u003c\/h3\u003e\u003cp\u003eBar pulls and architectural T-pulls. Flat strap pulls. The catalog is small because the spacing falls outside the main metric and imperial standards. Pulls offered at this length are usually from manufacturers that produce a continuous size range, letting designers specify to the exact required dimension. Finishes follow the modern pattern, with brushed nickel, matte black, and satin brass the most-stocked options.\u003c\/p\u003e\u003ch3\u003eAdjacent sizes worth comparing\u003c\/h3\u003e\u003cp\u003eThe closest neighbor is \u003ca href=\"\/collections\/drill-centers-11-5-16-287-3-mm\"\u003e11 5\/16 inch (287.3 mm)\u003c\/a\u003e. Below is \u003ca href=\"\/collections\/drill-centers-8-13-16-223-8-mm\"\u003e8 13\/16 inch (223.8 mm)\u003c\/a\u003e. Above is \u003ca href=\"\/collections\/drill-centers-12-304-8-mm\"\u003e12 inch (304.8 mm)\u003c\/a\u003e. Replacement projects at this exact spacing usually start from the original appliance or cabinet specification rather than from a measurement off existing hardware, since the 1\/32-inch precision is easy to misread on a steel rule.\u003c\/p\u003e","products":[],"url":"https:\/\/knobs.co\/collections\/drill-centers-11-11-32-288-1-mm.oembed","provider":"The Knobs Company","version":"1.0","type":"link"}