{"title":"Hardware Resources UMD - MDB Series Collection","description":"\u003ch2\u003eHardware Resources MDB Series Soft-Close Metal Drawer Boxes\u003c\/h2\u003e\u003ch3\u003eA complete steel drawer box, not a decorative line\u003c\/h3\u003e\u003cp\u003eThe Hardware Resources UMD - MDB Series is a functional cabinet system rather than a decorative pull or knob line. Each unit is a heavy-duty metal drawer box assembly that replaces a shop-built wood drawer box with a steel-sided unit shipped ready to mount. The box and slide arrive as one engineered piece: full-extension soft-close runners and 10mm dowel connections are integrated, so there is no separate slide to source, install, and adjust. The metal sides give a thin, consistent wall and a clean modern interior, and the full-extension travel reaches the back of the box, a measurable gain over partial-extension drawers in deep cabinets.\u003c\/p\u003e\u003ch3\u003eHeights, depths, and where each fits\u003c\/h3\u003e\u003cp\u003eThe series splits by side height and depth. Two heights, marked by the MDB-086 and MDB-164 codes, run roughly 86mm and 164mm, and each height comes in 400, 450, 500, and 550mm depths. The lower 86mm box suits shallow utility and tray drawers such as cutlery and flatware, while the 164mm height handles deeper pots-and-pans and cookware storage. Match the depth to the cabinet's interior clearance and the side height to the contents, since a too-tall box wastes space in a shallow cabinet. Confirm the cabinet opening width works with the system before ordering across a run. Because both heights share four depths, a cabinet shop can standardize on one soft-close system across a whole kitchen or bath.\u003c\/p\u003e\u003cp\u003eCoordinate with \u003ca href=\"\/collections\/pulls-and-handles\"\u003ecabinet pulls\u003c\/a\u003e and \u003ca href=\"\/collections\/knobs\"\u003ecabinet knobs\u003c\/a\u003e.\u003c\/p\u003e","products":[],"url":"https:\/\/knobs.co\/collections\/hardware-resources-umd-mdb-series-collection.oembed","provider":"The Knobs Company","version":"1.0","type":"link"}