{"title":"Hardware Resources UMS - 500 Series Collection","description":"\u003ch2\u003eHardware Resources UMS 500 Series Undermount Drawer Slides\u003c\/h2\u003e\u003ch3\u003eWhat the UMS 500 Series is and where it fits\u003c\/h3\u003e\u003cp\u003eThe Hardware Resources UMS 500 Series is a heavy-duty undermount drawer slide line with synchronized soft-close. The slides mount under the drawer box rather than on the sides, so no rail shows when the drawer is open and the box appears to float. They are rated at 100 pounds per pair, full extension, with a synchronized DURA-CLOSE soft-close that draws both rails in evenly and seats the drawer quietly. The synchronized action keeps a wide drawer from racking as it closes, since an unsynchronized pair can bind when one side leads the other. The series runs in lengths from 12 inches through 24 inches, covering small vanity drawers up to deep kitchen base drawers. The hidden mount suits frameless cabinetry, high-end kitchens and baths, and any drawer where the clean undermount look and a controlled close are the priority. Full extension matters most in deep drawers, where items at the back are otherwise hard to reach.\u003c\/p\u003e\u003ch3\u003eSpecs, fit, and common questions\u003c\/h3\u003e\u003cp\u003eKey specs: load rating 100 lb per pair; full extension; synchronized DURA-CLOSE soft-close; lengths 12 inches through 24 inches. Match slide length to the cabinet box depth, not the drawer face. Undermount slides demand more precise drawer-box construction than side-mounts, because box dimensions and notching must match the slide spec, so confirm build tolerances before ordering. Undermount vs side-mount: undermount hides the hardware for a cleaner box and a floating look, while side-mount shows a rail along each side. Are these good for frameless cabinets? Yes, the undermount design is well suited to frameless construction and high-end kitchens and baths. Do they handle heavy drawers? The 100-pound per-pair rating handles cookware and file drawers; verify it against the heaviest intended load. What lengths are available? The series runs from 12 inches through 24 inches. Specifying one series across a project keeps the close feel consistent from the smallest vanity drawer to the deepest base drawer.\u003c\/p\u003e\u003cp\u003eCoordinate with \u003ca href=\"\/collections\/pulls-and-handles\"\u003ecabinet pulls\u003c\/a\u003e and \u003ca href=\"\/collections\/knobs\"\u003ecabinet knobs\u003c\/a\u003e.\u003c\/p\u003e","products":[],"url":"https:\/\/knobs.co\/collections\/hardware-resources-ums-500-series-collection.oembed","provider":"The Knobs Company","version":"1.0","type":"link"}