Atlas Dickinson Collection

The Atlas Homewares Dickinson Collection. The Atlas Dickinson Collection is one of Atlas Homewares' transitional cabinet hardware lines, built around...

The Atlas Homewares Dickinson Collection

The Atlas Dickinson Collection is one of Atlas Homewares' transitional cabinet hardware lines, built around clean rectangular profiles with subtle ornamental detail. Atlas Homewares was founded by jewelry designer Adrienne Morea in 1993 in Los Angeles, and Dickinson sits in the everyday-transitional band of the brand's catalog — designed to suit a wide range of kitchen aesthetics without committing to either strict modern or strict traditional.

What sets Dickinson apart

The collection's signature is a tapered rectangular pull profile with restrained edge detailing — enough to read as deliberate, not so much that the pull competes with the cabinet door. Knobs in the collection echo the same restrained geometry. Finishes typically span warm and cool metals: brushed brass, brushed nickel, polished chrome, and matte black. The breadth of finish offerings makes Dickinson practical for kitchens built around different color palettes.

Where Dickinson works

Transitional kitchens with shaker doors, soft-contemporary kitchens with slab fronts, and bath vanities in transitional baths. The collection pairs across drawers and cabinet doors from a single line, which keeps the install coordinated without forcing collection-mixing. For more strongly contemporary hardware in the same brand, see Atlas Sleek; for ornamental traditional detail, look at Atlas Olde World.

Sizing and finish considerations

Dickinson pulls come in drill-center spacings standard for kitchen drawers and cabinets. Match pull length to drawer width — roughly a third of the front width is the common rule. Finish consistency across the install matters; a brushed brass Dickinson pull alongside brushed nickel hardware reads as accidental mixing rather than designed.

Frequently Asked Questions

What sizes do Atlas Dickinson pulls come in?

Dickinson pulls come in four center-to-center sizes: 3 inches, 3-3/4 inches, 5-1/16 inches, and 6-5/16 inches. Measure from the center of one screw hole to the center of the next on your existing cabinets and match that number. A pull that does not match means drilling new holes.

Does the Dickinson Collection have a matching knob?

Yes. The collection includes a 1-1/4 inch Octagon Knob. A common way to use it is a knob on cabinet doors and a Dickinson pull on drawers, which keeps the install coordinated from one line. A knob mounts through a single hole, so it is also the simpler swap on doors.

How do I pick the right Dickinson pull length for a drawer?

Start with the holes you already have, since the center-to-center spacing has to match. On new cabinets, a pull about one-third the width of the drawer front is a common starting point, so the shorter 3 and 3-3/4 inch pulls suit narrow drawers and the 5-1/16 and 6-5/16 inch pulls suit wider ones.

What Customers Say

Trusted by thousands of designers, builders, and homeowners

Kayla Malo is the most attentive and super human ever! My experience with this company is stellar!

C.M. — Oklahoma

Love working with Kayla, she is extremely helpful and quick with responding to my questions!

M.K. — Arizona

Kayla was GREAT!!!! Super help and fast answers. One of the best I've ever dealt with.

Ben — Oregon