5 inch (127 mm) drill-center pulls for wider drawers and Euro-built cabinets
5 inch (127 mm) drill-center pulls cover the spacing just below the European 128 mm spec. The two get used interchangeably in practice, and many North American manufacturers list pulls under whichever label the brand prefers. The size suits drawer fronts roughly 18 to 26 inches wide and shows up heavily on base cabinets and pot drawers. It's also the size most builder-grade brands moved to once their default drawer width crept up from 21 to 24 inches.
Where 5 inch fits
This is the size that takes over once a drawer is too wide for a 4 inch pull to look balanced. Pot-and-pan drawers, wide vanity drawers, and the lower drawers under cooktops sit in the 5 inch sweet spot. The pull is long enough to grip with a full hand, which matters on heavily loaded drawers. On a kitchen with stacked drawer banks, 5 inch on the larger lower drawers and 4 inch on the smaller upper drawers is a common designer pattern.
What hardware looks like here
Bar pulls and T-pulls are the most common at this length. The size is large enough that flat or squared bar profiles start to read more architecturally than the smaller centers. Cup pulls thin out at 5 inch (most cup pulls stop near 4 inch), but bin pulls and decorative pulls with backplates remain available. The size carries a confident, modern read. Finishes span the full catalog from polished chrome and brushed nickel through matte black and aged bronze.
Adjacent sizes worth checking
For the closest neighbor, see 5 1/16 inch (128.6 mm), which is the same physical spacing under the European label and often shows up on Italian and German cabinet runs. For smaller fronts, drop to 4 inch (101.6 mm). The size is widely available in polished chrome.
Frequently Asked Questions
How do I measure whether my existing cabinet holes match a 5-inch (127 mm) drill center?
Measure center-to-center between the two screw holes — that distance should be exactly 5 inches (127 mm). Use a ruler or calipers placed at the midpoint of each hole, not the edge. If the measurement reads 127 mm, any 5-inch pull will drop in without drilling new holes.
What drawer front width works best with a 5-inch (127 mm) pull?
A 5-inch (127 mm) drill-center pull is proportioned for drawer fronts roughly 18 to 26 inches wide. At that range the pull spans enough of the face to look balanced and provides a full-hand grip, which matters on heavily loaded drawers like pot-and-pan or wide vanity drawers. Narrower fronts under 18 inches typically look better with a 4-inch (101.6 mm) pull.
What is the difference between a 5-inch (127 mm) and a 5 1/16-inch (128.6 mm) drill center, and are they interchangeable?
The two specs differ by just 1.6 mm — 127 mm is the North American label and 128.6 mm (5 1/16 inch) is the European standard used on Italian and German cabinet runs. In practice they are used interchangeably across many product lines, and numerous brands list the same pull under whichever label the market prefers. When replacing hardware, verify the actual center-to-center measurement with calipers before ordering rather than relying on the label alone, since a 1.6 mm gap can matter if the holes are tight.
Which pull styles are available at the 5-inch (127 mm) center, and what happens to cup pulls at this size?
Bar pulls and T-pulls are the most common styles at 5 inches; at this length, flat or squared bar profiles read more architecturally than they do at smaller centers. Bin pulls and decorative pulls with backplates also remain available. Cup pulls largely drop out of the catalog near this size — most cup pull designs stop around the 4-inch (101.6 mm) center — so shoppers who prefer a cup pull style should check availability carefully or consider sizing down.
What Customers Say
Trusted by thousands of designers, builders, and homeowners
Kayla Malo is the most attentive and super human ever! My experience with this company is stellar!
Love working with Kayla, she is extremely helpful and quick with responding to my questions!
Kayla was GREAT!!!! Super help and fast answers. One of the best I've ever dealt with.