No products in this collection yet.
Browse All ProductsHardware Resources Plates - 400 Series mounting plates
The Hardware Resources Plates - 400 Series Collection is a functional hardware line, not a decorative one. It is the mounting-plate half of a European hinge system, supplying the cabinet-side plates that pair with 500 Series Euro hinges to set door alignment.
What identifies the 400 Series
These are concealed components, so the design is engineering rather than appearance. The line splits along clear axes: cam-adjustable versus non-cam-adjustable plates, and mounting heights of 0 mm, 3 mm, and 6 mm. Most plates are heavy-duty zinc die-cast, with a standard-duty steel option, and there are versions configured for cabinet refacing and others supplied without screws. The series is matched to 125-degree hinge applications within the 500 Series program.
Buying considerations
This collection is for cabinet builders, refacers, and installers replacing or specifying a known hinge system, not for shoppers choosing a look. Match the plate to your hinge series and the door overlay you need: the 0 mm, 3 mm, and 6 mm heights move the door in or out for full, half, or inset overlay. Cam-adjustable plates allow depth tuning after install, a real advantage on a long run of doors where small alignment differences add up; non-cam plates are simpler and cost less, fine where alignment is fixed and unlikely to need correction. The heavy-duty zinc die-cast plates suit larger, heavier doors, while the standard-duty steel option fits lighter applications. Confirm whether your application needs the screw-included or no-screw version before ordering, since refacing and retrofit jobs often supply their own fasteners. Matching the plate height and adjustment type to the existing hinge program is the single most important check, because a mismatch shows up as doors that will not sit flush across a run.
Related Hardware Resources collections
This line sits within the broader Hardware Resources catalog of functional cabinet and storage components. Browse the full Hardware Resources brand page.
Frequently Asked Questions
What is the Hardware Resources 400 Series, and what does it actually do in a cabinet?
The 400 Series is a line of mounting plates that form the cabinet-side half of a European concealed hinge system. These plates pair specifically with Hardware Resources 500 Series Euro hinges and are responsible for setting door alignment and overlay position. They are functional, not decorative — once the door is closed, the plates are hidden inside the cabinet.
What is the difference between cam-adjustable and non-cam-adjustable 400 Series plates?
Cam-adjustable plates allow depth tuning after the door is installed, which matters on long runs of cabinetry where small alignment variations accumulate across multiple doors. Non-cam plates are simpler and typically less expensive, and are appropriate where door alignment is fixed and unlikely to need post-install correction. Choosing between the two comes down to whether on-site fine-tuning is expected after the initial hang.
How do the 0 mm, 3 mm, and 6 mm plate heights relate to door overlay?
The mounting height of the plate — 0 mm, 3 mm, or 6 mm — determines how far the door sits in or out relative to the cabinet face, which corresponds to full, half, or inset overlay configurations. Selecting the wrong height is the most common source of doors that will not sit flush across a run of cabinets. The correct height must match both the existing hinge program and the intended overlay before ordering.
How do 400 Series zinc die-cast plates compare to the standard-duty steel option in the same line?
The majority of 400 Series plates are heavy-duty zinc die-cast, which makes them better suited for larger and heavier cabinet doors that place more load on the hinge system. The standard-duty steel option is available for lighter-weight applications where that extra load capacity is not needed. Both types are concealed components engineered to mate with 500 Series hinges, so the choice is driven by door weight and application demands rather than appearance.
What Customers Say
Trusted by thousands of designers, builders, and homeowners
Kayla Malo is the most attentive and super human ever! My experience with this company is stellar!
Love working with Kayla, she is extremely helpful and quick with responding to my questions!
Kayla was GREAT!!!! Super help and fast answers. One of the best I've ever dealt with.