Jeffrey Alexander Callie Collection

Jeffrey Alexander Callie Collection bar pulls

The Callie Collection from Jeffrey Alexander is a bar pull family. Every piece on this page is a Callie bar pull, sold by center-to-center size, and each size comes in several finishes. That makes the line simple to plan: settle on one finish, then pick lengths to suit each door and drawer.

Callie sizes

Callie pulls are listed in these center-to-center sizes:

• 3 inch (76 mm)
• 96 mm (about 3-3/4 inches)
• 128 mm (about 5 inches)
• 160 mm (about 6-5/16 inches)

Center-to-center is the distance between the two screw holes, not the overall length of the pull. If you are replacing old hardware, measure the hole spacing on an existing door or drawer and match it exactly. A pull that is a few millimeters off will not line up with the old holes, and the gap is hard to hide. On new cabinets with no holes yet, the choice comes down to proportion.

Choosing a length

A common rule is to scale the pull to the drawer front. The 3 inch and 96 mm sizes suit doors and narrow drawers. The 128 mm and 160 mm sizes fill out wider drawers so the pull does not look lost on the front. Many kitchens use two lengths: a shorter one on every door and a longer one across the drawer bank. Because all sizes share the same Callie profile, the mix still reads as one line.

Mounting and finish matching

Bar pulls mount with two screws driven through the door or drawer front from the inside. Thick or double-layer drawer fronts can need longer screws, so check the front's thickness before you drill. Keep one finish across the room so the pulls read as a set. Finish colors shift between daylight and warm bulbs, and two names can look alike on a screen. A sample held against your cabinet paint shows the real color first, and samples are refunded with your full order.

To compare Callie with other shapes, browse all bar pulls. For help with sizes and finishes, Kayla, the Keeper of the Knobs, brings two decades in cabinet hardware to free design help.