Home Cabinet Pulls & Handles Square Ended Bar Pulls

Square Ended Bar Pulls

Square-ended bar pulls and sculpted Du Verre pulls. Most of the pulls on this page come from Du Verre, which...

Showing 32 products

Square-ended bar pulls and sculpted Du Verre pulls

Most of the pulls on this page come from Du Verre, which makes its hardware from recycled aluminum and finishes each piece by hand. Alongside the straight Forged 3 bars you will find sculpted shapes: Wave, Offset, Offset Rectangle, Pomegranate, Rio, Arroyo, Marcel, and Argyle. A Top Knobs Edwardian pull in Patina Rouge rounds out the page. These are pulls meant to be noticed, for kitchens, baths, and fine furniture.

The straight bars: Forged 3

The Forged 3 series supplies the true bar shapes. The Flat Bar Pull has a wider, flat face, and the Square Bar Pull has a slimmer square profile. Both keep the textured look of the original forged pieces rather than a machined one. Lengths run from short drawer sizes up to 17-1/4 and 17-1/2 inch pulls for tall doors, and the 17-1/4 inch square bar is also sold as a pair.

The sculpted shapes

Wave pulls play with light and texture, and the pattern shifts with the ambient light whether you mount them vertically or horizontally. Pomegranate has a detailed, textured surface inspired by nature. The Offset Rectangle is a broad, short pull, and Rio, Arroyo, Marcel, and Argyle add more shapes in the same hand-finished style. Pick one design for the run of cabinets, or use a sculpted pull on an island and a Forged 3 bar on the perimeter.

Finishes

Most of these Du Verre pulls come in antique brass, oil rubbed bronze, and satin nickel. Some designs add other options: Offset in black matte and polished chrome, Marcel in black matte and polished aluminum, Pomegranate in satin brass, and Arroyo in white. Because each piece is finished by hand, small color variations from one pull to the next are normal, so order everything for one room together.

Sizing: read the drill centers, not the name

The inch figure in each Du Verre product name is the overall length, not the hole spacing. A 6 inch Forged 3 Square Bar Pull mounts on 3 inch centers, and a 9 inch Wave pull on 6 inch centers. Measure your existing holes center to center and match that number to the drill-center spec on the product page. Du Verre lists its dimensions as nominal and advises against pre-drilling, so check the pull in hand before drilling new holes. See the full Forged 3 and Pomegranate collections, or appliance pulls for refrigerator doors.

Frequently Asked Questions

What kinds of pulls are on this page?

Mostly Du Verre pulls. The Forged 3 Flat Bar and Square Bar pulls are the straight bars, with a textured, forged look. The rest are sculpted shapes: Wave, Offset, Offset Rectangle, Pomegranate, Rio, Arroyo, Marcel, and Argyle. Du Verre makes them from recycled aluminum and finishes each piece by hand. A Top Knobs Edwardian pull in Patina Rouge is also listed here.

What finishes do these Du Verre pulls come in?

Most designs come in antique brass, oil rubbed bronze, and satin nickel. A few add other choices: Offset and Offset Rectangle in black matte and polished chrome, Marcel in black matte and polished aluminum, Pomegranate in satin brass, and Arroyo in white. Not every design comes in every finish, so pick the finish first and then check that each pull you want is offered in it.

Is the size in the product name the hole spacing?

No. On Du Verre pulls the inch figure in the name is the overall length. The hole spacing is listed separately as the drill center. For example, the 6 inch Forged 3 Square Bar Pull mounts on 3 inch centers and the 9 inch Wave pull on 6 inch centers. For a replacement, measure your existing holes center to center and match that number, not the length.

Why can the color vary slightly from one Du Verre pull to the next?

Du Verre finishes its hardware by hand, so small variations in the final color can occur, and the maker treats them as part of the character of each piece rather than a defect. To keep a kitchen or bath consistent, order all the pulls for one room at the same time. Du Verre also lists its dimensions as nominal, so check a pull in hand before drilling new holes.

What Customers Say

Trusted by thousands of designers, builders, and homeowners

Kayla Malo is the most attentive and super human ever! My experience with this company is stellar!

C.M. — Oklahoma

Love working with Kayla, she is extremely helpful and quick with responding to my questions!

M.K. — Arizona

Kayla was GREAT!!!! Super help and fast answers. One of the best I've ever dealt with.

Ben — Oregon