Liberty Hardware pulls are the default pick in the cabinet aisle at nearly every home center, and for a lot of budget kitchen remodels in 2026 that's an easy, safe call. But easy isn't always the cheapest per-pull cost once you're buying 30 to 60 pieces for a full kitchen.
- Liberty Hardware pulls handle basic budget remodels fine, but cost more per hole than several in-stock alternatives in 2026.
- Amerock Bronx 10-1/16 inch appliance pull matches Liberty's price tier with heavier cast zinc construction. Buy.
- Atlas Homewares Tustin stainless pull is the cleanest swap for flat-front drawers. Buy.
- Elements Torino 4 inch bar pull is the pick for narrow drawers under 12 inches wide. Buy.
- Skip metric-spaced bar pulls like the Jeffrey Alexander Ivan 305mm unless your cabinet boxes are already drilled to that spacing.
Why this matters
Liberty Hardware moves more cabinet pulls through big-box retailers than almost any other brand, and that volume keeps its per-pull price low. On a whole-kitchen remodel where you need 30, 40, or 60 pulls, even a small price gap between brands adds up fast against a 2026 materials budget.
Volume pricing isn't the only variable that matters, though. Center-to-center spacing, base material, and finish durability decide whether a pull still looks right in year five instead of just year one. Knobs.co's guide to budget-friendly cabinet hardware breaks down which lines hold up without the premium price tag, and the picks below apply the same logic directly against Liberty Hardware's category.
Skipping those checks to save a few dollars per pull now is how remodels end up re-drilled twice in five years.
How we ranked
Each pick below is scored on three things that matter for a budget remodel: center-to-center spacing options, base material, and finish durability under daily hand contact.
Center-to-center spacing decides whether a pull drops into your existing cabinet drilling or forces new holes, which is real money when you're re-hardwaring 40-plus doors and drawers. Base material — cast zinc versus stamped steel versus solid brass — decides whether the pull develops play in the mounting screws within a year or two. Finish durability matters most on appliance pulls, where hand oils strip thin plating fast.
None of the picks below require a specialty installer, and all are sized to standard face-frame and flat-front cabinet doors common in U.S. kitchens as of 2026.
The ranked list
1. Amerock Bronx 10-1/16 inch appliance pull (BP36560) — the workhorse
Cast zinc construction and a 10-1/16 inch center-to-center spacing make this the direct swap for a Liberty Hardware appliance pull in the same size class. Cast zinc resists the wobble that stamped-steel pulls develop after a year of daily grip pressure on dishwasher and oven drawer fronts. It's stocked at Knobs.co in the Bronx 10-1/16 inch appliance pull line. Buy — this is the size and build to reach for on any long drawer or appliance panel.
2. Atlas Homewares Tustin 6-5/16 inch stainless pull (A972-MG) — the clean modern swap
A stainless finish resists fingerprints better than a plated finish, which matters on drawers that get touched with wet or greasy hands multiple times a day. The 6-5/16 inch spacing fits standard flat-front and shaker drawers without new drilling in most kitchens built after 2010. Find it as the Tustin stainless pull. Buy for flat-front or shaker cabinets under 24 inches wide.
3. Amerock Status 5-1/16 inch pull (BP36838) — the narrow-drawer fix
Same cast zinc base as the Bronx line, scaled down to a 5-1/16 inch center-to-center spacing for narrow bathroom vanity and utility drawers where a 10-inch pull won't physically fit. Buy — this is the size gap most Liberty Hardware budget lines leave uncovered.
4. Elements Torino 4 inch bar pull (S271-4MB) — the small-drawer specialist
A 4 inch center-to-center spacing and matte black finish target utensil drawers and small vanity fronts. This is a size Liberty's mainstream bar-pull runs frequently skip, forcing shoppers into a bigger pull than the drawer needs. Buy for any drawer front under 10 inches wide.
5. Jeffrey Alexander Ivan 305mm bar pull (566-305SN) — the metric outlier
305mm converts to roughly 12 inches, but it's drilled to a metric standard, not the inch-based spacing most U.S. cabinet boxes use. Satin nickel finish holds up fine day to day. Hold — only order this if your existing holes are already metric-spaced; otherwise you're drilling new holes anyway, which erases the budget advantage entirely.
6. Berenson Metro 224mm matte black pull (9858-1055-P) — the contemporary bar
224mm (about 8-13/16 inches) center-to-center in a slim matte black bar shape fits the flat-front, high-contrast kitchens trending through 2026. Buy for a contemporary look at a spacing most Liberty matte black runs don't stock.
Liberty Hardware pulls vs. in-stock alternatives
| Pick | Center-to-center | Base / finish | Best for | Verdict |
|---|---|---|---|---|
| Amerock Bronx (BP36560) | 10-1/16 inch | Cast zinc | Appliance & long drawers | Buy |
| Atlas Homewares Tustin (A972-MG) | 6-5/16 inch | Stainless | Flat-front drawers | Buy |
| Amerock Status (BP36838) | 5-1/16 inch | Cast zinc | Narrow drawers | Buy |
| Elements Torino (S271-4MB) | 4 inch | Matte black | Small/utility drawers | Buy |
| Jeffrey Alexander Ivan (566-305SN) | 305mm | Satin nickel | Metric-drilled boxes only | Hold |
| Berenson Metro (9858-1055-P) | 224mm | Matte black | Contemporary bar look | Buy |
Where to buy
- Order a physical sample before buying 40-plus pulls in one finish. Screen colors lie, especially on matte black and champagne bronze, and Knobs.co ships free samples so you're not gambling a full remodel budget on a photo.
- Confirm center-to-center spacing against your existing holes before ordering. A half-inch mismatch means new holes, wood filler, and a delayed install.
- Price-check before you commit to a case quantity. Knobs.co backs a 110% price match guarantee, so a lower price found on the same in-stock item elsewhere gets matched plus 10%.
FAQ
Are Liberty Hardware pulls good for a kitchen remodel?
Liberty Hardware pulls work fine for basic 2026 budget remodels where cost per unit matters more than material upgrades. They cover common sizes but leave gaps in narrow-drawer and metric-spacing options that specialty lines fill.
What center-to-center size should I buy for kitchen drawers?
Match the spacing already drilled into your cabinet boxes, typically 3 to 4 inches for narrow drawers and 8 to 12 inches for wide drawers or appliance panels. Measure the existing holes before ordering to avoid new drilling.
Is Amerock a good alternative to Liberty Hardware?
Yes, Amerock's Bronx and Status lines sit in the same budget price tier as Liberty Hardware pulls but use cast zinc construction that resists mounting-screw wobble longer. Both brands are common in 2026 kitchen remodels.
Do budget cabinet pulls need to match brand across the kitchen?
No, pulls only need to match finish and general style, not brand. Mixing Amerock, Atlas Homewares, and Elements pulls in the same finish reads as intentional, not mismatched.
What finish holds up best on high-touch appliance pulls?
Stainless and cast zinc with a sealed finish hold up best on appliance and long drawer pulls that get gripped with wet or greasy hands daily. Thin plated finishes wear faster in that spot than anywhere else in the kitchen.
Can I mix pull brands in one kitchen?
Yes, as long as the finish and profile style stay consistent room to room. A 2026 remodel commonly uses one brand for appliance pulls and another for standard drawers when sizing differs.
How do I know if my cabinets use metric or inch spacing?
Measure center-to-center on an existing pull hole in millimeters and inches. Round numbers like 96mm, 128mm, or 305mm indicate metric-drilled boxes, while 3 inch or 10 inch spacing indicates standard U.S. inch spacing.
One last thing
The Jeffrey Alexander Ivan pull's 305mm spacing is a tell that a lot of cabinet boxes sold in U.S. kitchens, even ones built domestically, get drilled to European metric standards. Measure your existing holes with a tape before assuming everything is inch-spaced, or you'll order the wrong pull twice in the same remodel — the single most common return reason in budget hardware swaps.