12 inch (304.8 mm) drill-center pulls for appliance fronts and large doors
12 inch (304.8 mm) drill-center pulls are squarely in appliance pull country. The 304.8 mm spacing is one of the most common standards for panel-ready dishwasher fronts, full-height refrigerator drawer panels, and oversized pantry doors. It's the size most home shoppers find when they're matching hardware to a panel-ready appliance run. The product count at this size is one of the highest in the entire drill-center category.
Where 12 inch fits
Panel-ready dishwashers from most major appliance brands. Refrigerator drawer fronts on column-style refrigeration. Full-height pantry doors in custom kitchens where the designer wants a vertical pull that holds its own against the door scale. Wine-storage cabinet faces. Some warming drawers and beverage centers on the larger end of the appliance category. The size is also the lowest common spec for matching pulls across a full appliance suite.
Style range at this length
Bar pulls in round, squared, and flat-strap profiles dominate. Architectural T-pulls. The catalog gets purpose-built at this size; almost every pull listed is engineered for the loads and lever arm a panel-ready appliance puts on the mounting hardware. The visual character is modern and architectural across the size, even on more traditional finishes. Solid-bar construction in stainless, brass, and bronze cores is standard, with hollow tubular designs essentially absent.
Adjacent sizes worth comparing
For narrower fronts, see 10 inch (254 mm). For wider, step up to 14 inch (355.6 mm). The 12 inch foot-imperial equivalent is also listed at 1'-0 inch (304.8 mm) by some manufacturers. For the dedicated category, see appliance pulls. Replacement-shopping volume at this size is one of the highest in the entire drill-center category. Most major appliance brands hold this spec across multiple product lines, so a single replacement pull selection often covers a full kitchen suite.
Frequently Asked Questions
What is a 12 inch (304.8mm) drill-center pull used for?
12 inch spacing is one of the standard sizes for panel-ready dishwasher fronts, full-height refrigerator drawer panels, and oversized pantry doors. It's longer than typical cabinet drawer pulls, which usually top out around 6 to 8 inches, so it's built for wide panels rather than standard drawers. Check your appliance manufacturer's spec sheet before ordering, since panel-ready fronts often require an exact spacing match.
How do I know if I need 12 inch cabinet pulls?
Measure center-to-center between the two screw holes on your existing pull or appliance panel; if it lands at 12 inches (304.8mm), that's your spacing. This size is uncommon on standard base or wall cabinet doors, so if you're replacing hardware on a regular door rather than an appliance panel, double-check your measurement before ordering.
Can 12 inch pulls be used on regular cabinet doors or drawers?
Rarely. At 304.8mm, this spacing is close to a foot long, more than double the width of most standard drawer fronts, so it looks oversized on typical 15 to 24 inch cabinet doors. It's built for large, flat surfaces like appliance panels and pantry doors where a shorter pull would look undersized.
Is 12 inch (304.8mm) an industry-standard appliance pull spacing?
It's one of the more common spacings for panel-ready appliances, alongside similar options in the 9 to 15 inch range depending on the appliance brand. Spacing isn't universal across manufacturers, so panel-ready dishwasher and refrigerator fronts can call for different lengths even within the same kitchen. Confirm the spec against your specific appliance model rather than assuming a single standard length.
What Customers Say
Trusted by thousands of designers, builders, and homeowners
Kayla Malo is the most attentive and super human ever! My experience with this company is stellar!
Love working with Kayla, she is extremely helpful and quick with responding to my questions!
Kayla was GREAT!!!! Super help and fast answers. One of the best I've ever dealt with.