Cup pulls bring back the half-moon, scooped grip that shaker, farmhouse, and traditional kitchens have used for generations, and picking the right one in 2026 comes down to three things: finish, center-to-center spacing, and how deep the scallop reads under cabinet lighting.
Shop cup pulls
Every cup pull we carry, in one place — filter by size, finish, and brand.
Browse Cup Pulls →- Cup pulls cabinet hardware in 2026 ranges $12.80 to $67.50 per pull across seven finishes reviewed here.
- Somerset Collection Cup Pull at $12.80 is the budget Buy; Bridges Collection covers most transitional kitchens.
- Berkshire Cup Pull in champagne bronze fits wider drawer fronts with 5-1/16 and 6-5/16 inch spacing - Buy.
- Studio II Collection at $67.50 is the trade-grade upgrade for design-forward kitchens - Buy for that budget tier.
- Most cup pulls carry 3, 3-3/4, and 5-1/16 inch cc spacing built into one plate - measure before ordering.
Why this matters
A cup pull shows more finish and more shadow than a knob or a flat bar pull - the scooped shape catches light differently depending on whether it's polished, satin, or matte, so the wrong finish choice is more visible on a cup pull than on almost any other hardware style. That's doubly true on farmhouse cabinets where the pull sits right next to an apron sink; see the breakdown on cup pulls for farmhouse kitchen sinks for sink-specific finish pairing.
Spacing matters as much as finish. Cup pulls mount on two screws at a fixed center-to-center distance, and most of the pulls in this list build three spacing options - 3", 3-3/4", and 5-1/16" (128mm) - into a single plate so you can match existing holes without redrilling. Get the spacing wrong and you're filling and refinishing cabinet fronts before you've hung a single drawer.
Cup pulls also take more daily wear than a knob, since drawers get pulled straight down dozens of times a day in a working kitchen. A thin plating on a $12 pull will show brassing or wear faster than a heavier casting, which is part of why price and finish depth track together on this list.
How these cup pulls are ranked
This lineup pulls from Knobs.co's catalog of cup pulls across Hickory Hardware and Belwith-Keeler, the two manufacturers that account for most cup pull production sold in 2026. Ranking criteria: price per pull, finish weight and plating depth, how many cc spacings each plate covers out of the box, and how well the finish matches other pulls, knobs, and appliance pulls sold in the same collection.
If your existing holes don't match any cup pull's built-in spacing, don't force it - filling and redrilling is cheaper than warping a cabinet front. The guide on converting cup pulls to bar pulls without redrilling covers the reverse situation for anyone going the other direction.
The ranked list
1. Somerset Collection Cup Pull, Black Nickel Vibed - the budget pick
Hickory Hardware's Somerset cup pull runs $12.80 per pull in 2026, the lowest price on this list. The Black Nickel Vibed finish has a slightly warmer, textured cast than a flat black nickel, and the plate covers 3", 3-3/4", and 5-1/16" (128mm) cc spacing in one piece. For a full kitchen re-hardware job where you're swapping 30-plus pulls, that price difference against $22-67 alternatives adds up fast. Buy for budget-driven, full-kitchen jobs.
2. Bridges Collection Cup Pull, Satin Nickel - the safe pick
At $22.40, the Bridges Collection cup pull carries an architectural, truss-inspired scallop with the same 3-in-1 spacing as Somerset. Satin nickel is the finish that pairs with the widest range of appliances and faucets in 2026 kitchens, which makes it the lowest-risk pick if you're not fully locked into a final palette. It's a step up in finish depth from Somerset without jumping to designer pricing. Buy for transitional kitchens or anyone hedging on finish decisions.
3. Bridges Collection Cup Pull, Oil-Rubbed Bronze Highlighted - the traditional pick
Same Bridges body, same $22.40 price, but the oil-rubbed bronze highlighted finish pulls verdigris-style highlights out of the recessed scallop that a flat dark finish can't. It reads warmer against oak, cherry, and maple cabinets than any nickel option on this list. If the kitchen leans traditional rather than modern farmhouse, this is the finish that won't look dated in a few years. Buy for wood-tone, traditional kitchens.
4. Dover Collection Cup Pull, Brushed Golden Brass - the warm-metal pick
Dover's cup pull costs $17.60 and uses a brushed golden brass finish - less shine than polished brass, warmer than satin nickel. It sits below Bridges in price while still carrying a genuine collection name behind it. Brass has been gaining ground against nickel and black across Knobs.co's cup pull catalog heading into 2026, and Dover is the least expensive way to test that finish before committing to a whole kitchen. Consider as a lower-risk brass test run.
5. Studio II Collection Cup Pull, Satin Nickel - the designer upgrade
Belwith-Keeler's Studio II cup pull runs $67.50 - nearly three times the Bridges price - for a heavier casting and a deeper scallop reveal that shows up under cabinet lighting where a shallower $22 pull can look flat. For a trade professional speccing a full remodel where the budget already assumes higher-end pulls, this is the upgrade that avoids a callback over hardware that looks cheap. Buy for design-forward budgets; Skip if the job is cost-driven.
6. Studio II Collection Cup Pull, Matte Black - the modern farmhouse pick
Same $67.50 Studio II body in matte black. Matte resists fingerprint show far better than a glossy black finish, and the cup shape adds texture to an all-black hardware scheme that can otherwise look flat against flat-front cabinets. It's a way to soften a heavy black kitchen without switching finishes entirely across the whole room. Consider for modern farmhouse kitchens already committed to black hardware.
7. Belwith-Keeler Berkshire Cup Pull, Champagne Bronze - the trending finish pick
The Berkshire cup pull in champagne bronze breaks from the 3-in-1 spacing pattern with 5-1/16" and 6-5/16" (160mm) cc options - wider spacing built for kitchen islands and oversized drawer fronts where a 3" pull looks undersized. Champagne bronze has been one of the most-requested cup pull finishes in Knobs.co's 2026 catalog, sitting between gold and bronze without reading fully as either. Buy for islands, wide drawers, or a two-tone kitchen update.
Cup pull comparison table
| Cup Pull | Finish | CC Spacing | Price | Verdict |
|---|---|---|---|---|
| Somerset Collection | Black Nickel Vibed | 3", 3-3/4", 5-1/16" | $12.80 | Buy |
| Bridges Collection | Satin Nickel | 3", 3-3/4", 5-1/16" | $22.40 | Buy |
| Bridges Collection | Oil-Rubbed Bronze Highlighted | 3", 3-3/4", 5-1/16" | $22.40 | Buy |
| Dover Collection | Brushed Golden Brass | 3", 3-3/4", 5-1/16" | $17.60 | Consider |
| Studio II Collection | Satin Nickel | 3", 3-3/4", 5-1/16" | $67.50 | Buy/Skip |
| Studio II Collection | Matte Black | 3", 3-3/4", 5-1/16" | $67.50 | Consider |
| Berkshire | Champagne Bronze | 5-1/16", 6-5/16" | Check current price | Buy |
Where to buy cup pulls
- Order a sample of the actual finish before buying enough for a full kitchen - screen photos shift warm and cool casts, especially between satin nickel and brushed nickel, and Knobs.co ships free samples so you're not guessing off a monitor.
- Stick to one collection when replacing every pull in a kitchen. Bridges, Studio II, and Berkshire each keep scallop depth and cc spacing consistent across the whole run, so drawers and doors match instead of looking assembled from different eras.
- Compare price before ordering 30-plus pulls for a whole-kitchen job. Knobs.co backs its pricing with a 110% price match, so if the identical SKU turns up cheaper elsewhere, bring the price and it gets matched.
FAQ
What size cup pull is standard for kitchen cabinets?
Most cup pulls ship with 3 inch, 3-3/4 inch, or 5-1/16 inch (128mm) center-to-center spacing built into one plate in 2026, so a single pull fits several existing hole patterns without redrilling. Wider drawer fronts and islands often use 5-1/16 inch or 6-5/16 inch (160mm) spacing instead.
Are cup pulls still in style in 2026?
Yes - cup pulls remain a standard option alongside bar pulls and knobs in 2026, especially on farmhouse, shaker, and transitional kitchens. Champagne bronze and matte black are the two finishes seeing the most interest this year.
Cup pulls vs bar pulls - which is better for cabinets?
Cup pulls work best on drawers because the scooped shape is built for a downward pull with a full hand, while bar pulls read cleaner on tall doors and pantry fronts. Many 2026 kitchens mix both styles - cup pulls on drawers, bar pulls on doors.
How much do cup pulls cost?
Cup pulls cabinet hardware runs $12.80 to $67.50 per pull in 2026 depending on collection and finish. Hickory Hardware's Somerset and Bridges lines sit at the low end; Belwith-Keeler's Studio II collection sits at the high end.
Can cup pulls go on cabinet doors, or just drawers?
Cup pulls are built for drawers because the scoop is meant to be gripped from above and pulled outward and down. On cabinet doors, a bar pull or knob gives a more natural grip since the motion is push-pull rather than downward.
Do cup pulls need special mounting holes?
No - most cup pulls use standard two-hole mounting at one of three common cc spacings (3 inch, 3-3/4 inch, or 5-1/16 inch), which matches holes already drilled for existing pulls in most kitchens. Confirm your current spacing before ordering to avoid drilling new holes.
Can I convert bar pull holes to cup pulls?
Only if the existing center-to-center spacing matches one of the cup pull's built-in options; otherwise the holes need to be filled and redrilled. Going the other direction - cup pulls to bar pulls - typically needs the same fill-and-redrill approach since bar pulls run longer spacing.
One last thing
The three-spacing plate is the detail most buyers miss: a single Bridges or Somerset cup pull covers 3", 3-3/4", and 5-1/16" cc in one casting, which means you can often match whatever spacing is already drilled into your cabinets without a tape measure fight or a return trip to the hardware aisle. Check your existing holes first - it saves a redrill on a good share of the kitchens moving through Knobs.co's cup pull catalog in 2026.